Please accept our cookies to get the best experience of our website.
By clicking “Accept All Cookies”, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
TG Series Thermal Grease
TG series thermal conductivity silicone grease is a kind of high thermal conductivity silicone grease, which can effectively reduce the contact thermal resistance between the radiator and the heat source. Suitable for applications requiring minimal compression thickness, constant pressure and easy screen printing for optimal performance.
Features: low oil separation (towards 0), high-quality white and grey thermal paste, good reliability, strong weather resistance (high and low temperature resistance, moisture resistance, ozone resistance, aging resistance, etc.).
Applications: 5G, automated driving systems, OnBoard Charger (OBC), servers, ICs, CPU, GPU, MOS, LEDs, communication equipment, virtual reality (VR), consumer electronics, telecommunications and data communications.
Send Inquiry
Applications: 5G, automated driving systems, OnBoard Charger (OBC), servers, ICs, CPU, GPU, MOS, LEDs, communication equipment, virtual reality (VR), consumer electronics, telecommunications and data communications.
Technical Information
Attribute |
Value |
Test Method |
||||
|
- |
TG 100 |
TG 200 |
TG 300-S |
TG 300 |
- |
|
|
Composition |
Non-Vulcanized Silicone Oil and Thermally Conductive Filler Mixture |
- |
||||
|
Color |
White |
White |
Grey |
Grey |
Visual |
|
|
Density (g/cc) |
2.7 |
2.8 |
3.3 |
3.3 |
ASTM D792 |
|
|
Cone Penetration (0.1mm/25℃) |
250 |
280 |
320 |
280 |
GB/T269 |
|
|
Usage Temperature (°C) |
-40 ~ +150 |
-40 ~ +150 |
-40 ~ +150 |
-40 ~ +150 |
- |
|
|
Flammability |
V-0 |
V-0 |
V-0 |
V-0 |
UL 94 |
|
Electrical |
||||||
|
Breakdown Voltage (kV/mm) |
≥ 4.0 |
≥ 4.0 |
＞5.0 |
＞5.0 |
ASTM D149 |
|
Thermal |
||||||
|
Thermal Conductivity
(W/m.K) |
1.0 |
2.0 |
3.0 |
3.0 |
ISO 22007-2 |
|
| Thermal Resistance (°C-in2/W) |
≤ 0.15 |
≤ 0.06 |
≤ 0.04 |
≤ 0.04 |
ASTM D5470 |
|
Legal Disclaimer
The technical information and data shown on this page should be considered representative or typical only and should not be used for specification purposes. Please contact us or e-mail sales@aok-technologies.com to determine product availability.
* Thermal Grease Note
Packing specification: 30ml/ 1kg, 2kg, 10kg.
Instructions
Clean the application surface first, then stir the silicone grease evenly, and then apply the silicone grease to the surface by dot coating, brushing or screen printing. If screen printing is used, it is recommended to use 60 ~ 80 mesh nylon screen, and a rubber scraper with a hardness of about 70. When coating, apply silicone grease at about 45 degrees to the coated surface. After the operation, unused products should be sealed and stored in time.
Shelf life & Storage
Shelf life of the product is 6 months after date of shipment. Store in a cool, dry, well ventilated place.
Additional Documents
Related Products
UTP100 Series Thermal Pad
UTP100 is an extremely soft gap filler pad with a fiberglass reinforced liner, on one side.
Learn More
TP120 Series Thermal Pad
TP120 is an extremely soft gap filler pad, design to be a versatile thermal workhorse.
Learn More
TP150 Series Thermal Pad
TP150-S is an extremely ultra soft gap filler pad, specifically designed to many design needs.
Learn More
TP200 Series Thermal Pad
TP200-S gap filler pad, is key when your thermal needs begin to changed from design enhancement to thermal requirement.
Learn More
TP300 Series Thermal Pad
TP300 an extremely soft gap filler pad that also harnesses exceptional thermally conductive characteristics.
Learn More
TP400 Series Thermal Pad
TP400 elevates the thermal performance bar, achieving 4.0W/m.K while maintaining a hardness of 55 (shore 00).
Learn More
