Please accept our cookies to get the best experience of our website.
By clicking “Accept”, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
One-Part Dispensable Gap Filler
TM series one-part dispensable gap fillers are a kind of silicone thermal conductive products with strong plasticity. The application process can be made into sheet products with high compression rate or semi-flow state to meet the automatic dispensing process according to the needs of customers. It has high efficiency of thermal conductivity and excellent caulk effect, and is mainly used in low pressure and the demand for silicon volatilize.
Features: 3.0 ~ 8.0 W/m.K, no cure required, highly compliant, low pressure vs deflection, liquid adhesive.
Applications: networking and telecommunications, notebooks, tablets, memory modules, industrial: LEDs, power supplies, power bank fast charger.
Send Inquiry
Applications: networking and telecommunications, notebooks, tablets, memory modules, industrial: LEDs, power supplies, power bank fast charger.
Technical Information
Attribute |
Value |
Test Method |
|||||||
| - | TM300 | TM400 | TM500 | TM600 | TM700 | TM800 | - | ||
| Composition | Ceramic Filler + Silicone | - | |||||||
| Color | Green | Pink | Red | Orange | Blue | Pink | Visual | ||
| Density (g/cc) | 2.9 | 3.4 | 3.5 | 3.4 | 3.2 | 3.3 | ASTM D792 | ||
| Flammability | V-0 | V-0 | V-0 | V-0 | V-0 | V-0 | UL 94 | ||
| Usage Temperature (°C) | -60 ~ +200 | -40 ~ +200 | -40 ~ +150 | -50 ~ +150 | -50 ~ +150 | -40 ~ +150 | - | ||
Electrical |
|||||||||
| Breakdown Voltage (kV/mm) | ≥ 5.0 | ＞6.0 | ＞5.0 | ≥ 4.5 | ＞4.0 | ＞5.0 | ASTM D149 | ||
| Volume Resistivity (Ω.cm) | 1014 | 1010 | 1010 | 1012 | 1014 | 1014 | ASTM D257 | ||
Thermal |
|||||||||
| Thermal Conductivity (W/m.K) | 3.0 | 4.2 | 5.0 | 6.0 | 7.0 | 8.0 | ISO 22007-2 | ||
|
Thermal Resistance (℃-in2/W) @50psi |
＜0.31 | ＜0.1 | ≤ 0.04 | 0.05 | 0.045 | 0.05 | ASTM D5470 | ||
Legal Disclaimer
The technical information and data shown on this page should be considered representative or typical only and should not be used for specification purposes. Please contact us or e-mail sales@aok-technologies.com to determine product availability.
* Product Note
300ml cartridge/ 1kg jar / 20kg pail.
Directions for use
• Stir prior to use;
• Application surface should be clean and free of dust, dirt or oils;
• When using material from jar or pail, the container should be sealed and closed immediately after usage to prevent foreign material contamination;
• Follow storage instruction for unused material;
• Application bond line should not exceed 6mm;
• Avoid contact with the eyes;
• Product is nontoxic.
Storage
Store in a cool, dry, well-ventilated place.
Shelf life
Shelf life of the product is 6 months after date of shipment.
Additional Documents
Related Products
UTP100 Series Thermal Pad
UTP100 is an extremely soft gap filler pad with a fiberglass reinforced liner, on one side.
Learn More
TP120 Series Thermal Pad
TP120 is an extremely soft gap filler pad, design to be a versatile thermal workhorse.
Learn More
TC Series Electrically Insulating Thermal Sheet
TC Series provide that high cut through resistance and electrical insulation that the most demanding applications require.
Learn More
TF Series Thermal Conductive Gap Fillers
TF series thermal conductive gap fillers are two part, 1:1 ratio, ceramic filled silicone dispensable gap fillers.
Learn More
GF Series Thermally Conductive Potting Encapsulant
When the two liquid components are fully mixed, the GF series thermal potting compound will solidify into a flexible elastomer for protection of electrical/electronic applications.
Learn More
One-Part Dispensable Gap Filler
TM series one-part dispensable gap fillers are non-curing ceramic filled silicone materials.
Learn More
